Displaying The Radio Data System Information - Yamaha CRX-330 Manual De Instrucciones

RADIO DATA SYSTEM TUNING (U.K. AND EUROPE MODELS ONLY)
5
Press Center to start searching for available
Radio Data System preset stations.
If a station broadcasting the selected program type is
found, the receiver stops searching, and then program
service name and the PTY indicator lights up in the
front panel display.
If there is no station broadcasting the selected
program type, the frequency currently selected
appears.
6
Repeat step 4 until the desired station is
found.
Displaying the Radio Data System
information
Use this feature to display the 4 types of the Radio Data
System information: PS (program service), PTY (program
type), RT (radio text) and CT (clock time). The
corresponding indicators light up in the front panel
display.
Notes
• You can select one of the Radio Data System modes only when
the corresponding Radio Data System indicator lights up in the
front panel display. It may take a while for this unit to receive
all of the Radio Data System data from the station.
• You can select only the available Radio Data System modes
being offered by the station.
• If the signals being received are not strong enough, this unit
may not be able to utilize the Radio Data System data. In
particular, the "RT" mode requires a large amount of data and
may not be available even when the other Radio Data System
modes are available.
• In case of poor reception conditions, hold down TUNING
so that the AUTO indicator disappears from the front panel
display.
• If the signal strength is weakened by external interference while
this unit is receiving the Radio Data System data, the reception
may be cut off unexpectedly and "...WAIT" appears in the front
panel display.
• When the "RT" mode is selected, this unit can display the
program information by a maximum of 64 alphanumeric
characters, including the umlaut symbol. Unavailable characters
are displayed with the "_" (underscore).
22
En
DISPLAY
While tuning into a Radio Data System station,
press DISPLAY repeatedly to select the desired
Radio Data System display mode.
• Select "PS" to display the name of the Radio Data
System program currently being received.
• Select "PTY" to display the type of the Radio Data
/
System program currently being received.
• Select "RT" to display the information on the
Radio Data System program currently being
received.
• Select "CT" to display the current time.
STANDBY ON
SLEEP
CD iPod FM USB
FM
PRESET
TUNING MEMORY
FUNCTION
MENU
DISPLAY
FOLDER
SHUFFLE REPEAT
MUTE VOLUME
PS
PTY
RT
CT
Frequency