Docking Station - Olympus DS-9500 Guía Rápida Del Usuario

• There is a risk of explosion if
the battery is replaced with the
incorrect battery type.
• Dispose of the used battery
following the instructions.
• Please recycle batteries to help
save our planet's resources.
When you throw away dead
batteries, be sure to cover their
terminals and always observe
local laws and regulations.
• Always charge a rechargeable
battery when using it for the
first time, or if it has not been
used for a long period.
• Rechargeable batteries have
limited lifetime. When the
operating time becomes shorter
even if the rechargeable battery
is fully charged, replace it with
a new one.

Docking station

Danger
f
• Never disconnect the AC
adapter or power cord with
a wet hand. This may cause
electric shock or injury.
• Only use the dedicated AC
adapter with the docking
station. Using it in combination
with other AC adapters may
cause overheating, fire, or
malfunction.
Warning
f
• Never disassemble, modify,
or repair the docking station
yourself. This may cause fire,
electric shock, or injury.
• Never use the docking station
in locations where it might
come into contact with liquids.
Getting the docking station wet
may cause fire or electric shock.
12
• Do not drop the docking station
or allow it to suffer extreme
shocks. This may cause damage,
or fire or electric shock.
• Do not touch the connector or
insert the metal wires or similar
object into any of the plugs.
This may cause fire, or electric
shock.
Caution
f
• Unplug the AC adapter or power
cord from the docking station
and AC outlet when not using
for extended periods of time. If
this precaution is not followed
and the docking station is
damaged then fire may occur.
• The docking station (CR21)
is designed specifically for
Olympus DS-9500/DS-9000. Do
not use with other products.
AC adapter
Danger
f
• The supplied power cord is
specific for the AC adapter only.
Do not use the power cord for
other product. Also, do not use
a power cord of other product
for the AC adapter.
• Be sure to use the AC adapter
with the proper voltage (AC
100 - 240 V). Using it with other
voltage levels may cause fire,
explosion, overheating, electric
shock or injury.
• For safety, be sure to unplug
the AC adapter from the outlet
before performing maintenance
or cleaning. Also, never plug in
or disconnect the power plug
with a wet hand. This may cause
electric shock or injury.
Warning
f
• Do not attempt to disassemble,
repair or modify the AC adapter
in any way.
• Keep foreign objects including
water, metal, or flammable
substances from getting inside
the product.
• Do not moisten the AC adapter
or touch it with a wet hand.
• Do not use the AC adapter in
the vicinity of flammable gas
(including gasoline, benzine
and lacquer thinner).
• Always stop recording before
connecting or disconnecting
the power supply plug.
• When the AC adapter is not
in use, disconnect the power
supply plug from the power
outlet.
• Use only power supply of the
correct voltage, as indicated on
the adapter.
In case:
® ... the internal parts of the AC
adapter are exposed because
it has been dropped or
otherwise damaged:
® ... the AC adapter is dropped
in water, or if water, metal
flammable substances or
other foreign objects get
inside it:
® ... you notice anything
unusual when using the AC
adapter such as abnormal
noise, heat, smoke, or a
burning odor:
1. do not touch any of the exposed
parts;
2. immediately disconnect the
power supply plug from the
power outlet, and;
3. call your dealer or local Olympus
representative for servicing.