cascade corporation 20G-77G Instrucciones De Instalación página 2

C
ONTENTS
Recommended Hydraulic Supply
Truck Requirements
Installation
Attachments without Arms
Periodic Maintenance
Nameplate Icons
R
ECOMMENDED HYDRAULIC SUPPLY
20G–77G Non-Revolving Clamps provide the best
performance with one of the hydraulic supply
arrangements shown below. Refer to Cascade Hose &
Cable Reel Selection Guide, Part No. 212199, to select the
correct hose reel for the mast and truck. The hose and
fitting requirements are:
• All hoses and fittings for CLAMP and SIDESHIFT
functions should be at least M8 with a minimum internal
diameter of 7 mm.
A
i
i
This Manual provides instructions for installing Cascade
20G–77G Non-Revolving Clamps. Follow the suggested
installation procedures for best results.
1
If you have any questions or need more information, contact
your nearest Cascade Service Department for assistance.
Refer to back cover.
2
Read the WARNING Statements placed throughout this
manual to emphasize safety during attachment installation.
9
IMPORTANT: Field alterations may impair performance
or capability and could result in loss of warranty. Consult
10
Cascade for any required modifications.
Weighted Emission Sound Pressure Level - Weighted
12
emission sound pressure level (LA) does not exceed
70 dB(A).
Measured Value of Whole Body Vibration - Measured
value of whole body vibration (m/s
2
0,5 m/s
Measured Value of Hand-Arm Vibration - Measured value
of hand-arm vibration (m/s
Non-Sideshifting
Sideshifting
B
C
Sideshifting with Solenoid
GA0033.eps
2
) does not exceed
.
2
) does not exceed 2,5 m/s
A or B
RH or LH THINLINE™ 2-port hose reel group.
OR
C
Mast single internal hose reeving group.
A and B
RH and LH THINLINE 2-port hose reel groups.
™
OR
C
Mast double internal hose reeving group.
A
6-N-1 cable/hose reel group.
OR
A and C
Cable reel and single internal hose reeving group.
2
.
6033701-R6 EN