Arthrex AR-1650S Instrucciones De Uso página 10

Arthrex Shoulder Suspension System AR-1650S
Instructions for Use
Removal of System Components
Lateral Sling Connector
Remove the Lateral Sling Connector by pressing up on the silver trigger
to release the lock. Then lift the connector off of the lateral extension
rod (Figure 23).
Arm Sleeve Connector
Remove the Arm Sleeve Connector by loosening the top blue section of
the connector (clockwise). Once the hook is loose remove the connector.
Suspension Tower
To collapse the Tower first ensure that the pulley carriage is in the
Home position (Figure 24).
Once the pulley carriage is in the bottom Home position pull down on
the handle at the end of the Tower to release the lock. Allow the top of
the Tower to slide back towards the operator until the kickstand
disengages (Figure 25).
Manufactured For:
Arthrex, Inc.
1370 Creekside Blvd
Naples, FL 34108, USA
1-(800) 934-4404
Figure 23
Figure 24
Arthrex GmbH Allen Medical Systems
Erwin-Hielscher-Strasse 9 100 Discovery Way
Acton, MA 01720
81249 München, Germany
(978) 263-5401
+49 89 909005-0
Once the kickstand has disengaged press the upper end of the Tower
where the handle is located into its Home section on the lower section
of the Tower. There should be a click when the Tower is completely
folded and locked in place (Figure 26).
Remove the Tower by pressing up on the blue trigger at the bottom of
the Tower. This allows the Tower to be tilted back and removed.
Place the Tower in the Cart (AR-1650-06).
Hill Rom SAS
B.P. 14 Z.I. du Talhouet
56330 Pluvigner, France
Tel. +33 (0) 2 97 50 92 12
Fax. +33 (0) 2 97 50 92 12
Figure 25
Figure 26
D-720764-A2
3 AUG 2016 Page | 10