Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Fireplace Installation
WARNING: Ensure the power
cord is not installed so that it is
pinched or against a sharp edge
and ensure that the power cord is
stored or secured to avoid tripping
or snagging to reduce the risk
of fire, electric shock or injury to
persons.
WARNING: Construction
and electrical outlet wiring must
comply with local building codes
and other applicable regulations
to reduce the risk of fire, electric
shock and injury to persons.
WARNING: Do not attempt
to wire your own new outlets or
circuits. To reduce the risk of fire,
electric shock or injury to persons,
always use a licensed electrician.
WARNING: To reduce the risk
of fire, do not store or use gaso-
line or other flammable vapors or
liquids in the vicinity of the heater.
CAUTION:
circulation beneath the fire-
place insert is provided by two
rubber feet.
Do not install the fireplace
insert directly on carpet or
similar surfaces which may
restrict air circulation.
CAUTION:
fireplace in a carpeted area, place
a one-piece, solid, flat surface
Clearance for air
If installing the
under the fireplace. Ensure that
both of the feet rest securely on
this surface.
CAUTION:
risk of fire, keep electrical cords,
drapery, furnishings, and other
combustibles at least 3 ft (0.9 m)
from the front of the heater.
!
NOTE:
The dimensions of
the fireplace are 30 ¼ in. (768
mm) wide x 25 ½ in. (648
mm) high x 10 ½ in. (267 mm)
Figure 1
A
B
3
11
"
4
298 mm
High temperature,
25
3
"
4
654 mm
3
11
"
4
298 mm
1
30
"
2
775 mm
25
654 mm
1
30
"
2
775 mm
3
"
4
7
Capítulos
Tabla de contenido
