Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Maintenance
light bulbs. Care must be taken
when removing the log set as the
log set contains LED's and wires.
To access the lower light bulb
area:
CAUTION: Allow at least five
minutes for light bulbs to cool off
before touching bulbs to avoid ac-
cidental burning of skin.
1. Slide fireplace out of mantel.
2. Remove four Phillips screws
from right side of trim (Figure
6).
3. Remove trim.
4. Slide glass to right side of fire-
place to remove (Figure 6).
5. Pull the front edge of the
plastic Log Set or plastic grate
up and forward until the rear
Figure 6
Upper Light Bracket
Lower Bulbs
Log Set Assembly
tab releases from the ledge
located at the bottom of the
mirror (Figure 7).
!
IMPORTANT: Only handle the
Log Set Assembly by the Em-
ber Bed or plastic grate.
!
NOTE: Log Set Assembly fits
tightly into firebox, some force
may be necessary to remove.
6. Set Log Set Assembly in front
of fireplace.
7. Disconnect the Log Set As-
sembly's LED wire harness
from unit.
8. Unscrew bulbs counter clock-
wise.
9. Insert new bulbs and screw in
clockwise.
10. Reconnect the LED wire har-
Upper Bulbs
LED Wire Harness
Front Glass
Trim
15
Capítulos
Tabla de contenido
