Remote Control - Dimplex DF3015 Manual Del Propietário

Operation
temperature cutoff switch can be
reset by unplugging the unit, wait-
ing five (5) minutes and plugging
the unit back in.
CAUTION: If you need to
continuously reset the heater,
unplug the unit and call Dim-
plex North America Limited at
1-888-346-7539. Please have
your model and serial number
ready when calling.

Remote Control

The remote control has a range
of approximately 50 feet (15.25
m), it does not have to be pointed
at the fireplace and can pass
through most obstacles (including
walls). It is supplied with 243 in-
dependent frequencies to prevent
interference with other units.
Battery Installation
1. Depress tab on the battery
cover on the back of the
remote control and remove
battery cover.
2. Install two AAA batteries into
the remote control (included).
3. Ensure Child Lock is in the
"unlocked" position (Figure 3).
4. Replace the battery cover.
!
NOTE: When the "BAT" sym-
bol is present on the remote
10
Figure 3
Batteries
Child Lock
control it is recommended to
replace the batteries promptly,
to maintain full functionality of
the remote/fireplace. The re-
mote transmitter has a battery
backup time of only several
hours.
Battery must be recycled
or disposed of properly.
Check with your Local
Authority or Retailer for recycling
advice in your area.
Remote Control Initialization/
Reprogramming
1. Plug cord into a 120 Volt wall
outlet.
2. Ensure the Main On/Off Switch
located in the switch box on
the fireplace in the lower right
hand corner is in the On
position.
3. Set the 3-Position Switch (Fig-
www.dimplex.com