Maintenance; Light Bulb Replacement - Dimplex DF3015 Manual Del Propietário

Ocultar thumbs Ver también para DF3015:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Operation
the sleep timer digits.
3. Release the O button and the
Q
button.
4. Press the Initialization button
on the unit (Figure 2C).
5. Press the
H
remote.
Your remote will now have a dif-
ferent frequency communicating
with the fireplace.

Maintenance

WARNING: Disconnect power
before attempting any main-
tenance or cleaning to reduce
the risk of fire, electric shock
or damage to persons.
!
NOTE: The fireplace should
not be operated with an accumu-
lation of dust or dirt on or in the
unit, as this can cause a build up
of heat and eventual damage. For
this reason the heater must be
inspected regularly, depending
upon conditions and at least at
yearly intervals.

Light Bulb Replacement

Light bulbs need to be replaced
when you notice a dark section of
the flame or when the clarity and
14
button on the
detail of the log ember bed exte-
rior disappears. There are three
bulbs under the log set assembly
which generate the flames and
embers, and two bulbs above that
illuminate the log exterior.
Lower Light Bulb Requirements
Quantity of three clear chande-
lier or candelabra bulbs with an
E-12 (small) socket base, 60 Watt
rating. Example: GE 60BC or
Philips 60CTC. Do not exceed
60 Watts per bulb.
Helpful Hints:
replace all light bulbs at one time
if they are close to the end of their
rated life. Group replacement will
reduce the number of times you
need to open the unit to replace
It is a good idea to
www.dimplex.com
Tabla de contenido
loading

Tabla de contenido