Section 5
Page 18
5
Operation
ATTENTION
5.1
Operation
ATTENTION
NOTE
Loading
§
Lock the tray transport trolley with the total lock locks to prevent rolling back.
§
Insert trays in the sideways guides.
§
Close the doors and lock it with the transport safety device.
§
Release the total locks.
§
Carefully push or pull the tray transport trolley to the destination place.
Unloading
§
Release the total lock and roll the tray transport trolley to the destination.
§
At the destination, lock the casters with the total locks.
§
Unlock the doors.
§
Remove the trays.
5.2
Measures at the End of Use
Proceed as follows to switch off the tray transport trolley:
§
Push or pull carefully the tray transport trolley (if necessary) to the destination place.
§
Secure the casters with the total locks.
Tray transport trolley
TTW/V
Damage to appliances
The tray transport trolley may only be operated when it is in perfect condition
with regards to technical standards. The appliance must be checked for visi-
ble external damage and defects each time before being operated.
In case of damage, immediately inform the competent bodies and do not put
the tray transport trolley into operation.
Appliance damages
Heavily loaded tray transport trolleys can roll and tip over during the traction
operation. Do not exceed the maximum traction speed of 2.5 mph (4 km/h).
The maximum speed applies for flat and dry concrete and a path width of at
least 98.4'' (2.5 m).
You can join up to three tray transport trolleys in a row. Reduce the traction
speed accordingly when changing a parameter.
Inductive operation
Only appropriate induction crockery released by HUPFER with portioned
meals on the intended markings of the trays may be used when the tray
transport trolley is used together with the inductive docking station.
During operation, there should be no GN containers, cutlery or any other
metal objects inside the tray transport trolleys.
Operation
Operation
91275972_A1