Bartscher 70 Serie Manual página 87

Motor of the ventilated electric oven (fig. 50, p. 16)
In order to replace the motor of the ventilated electric oven, proceed as described in the preceding
paragraph: remove the fan and the appliance back panel, so to reach the oven back side. Disconnect
the electric cables; unscrew the fixing screws (5) that fasten the motor to its support and remove the
motor (4) from the support.
Electric components of the ventilated electric oven (fig. 51, p. 16)
In order to replace the selector (4) and the thermostat (5) of the ventilated electric oven, unscrew the
fixing screws (1 and 2) of the control board (3); remove the control board; disconnect the electric
cables of the component and replace the component. Then, connect the electric cables following the
instructions of the wiring diagram.
Ventilated electric oven elements (fig. 52, p. 16)
In order to replace the heating elements of the ventilated oven, extract the wire grill, the bottom (1),
the top diffusor and the grill holders. Then, unscrew the fixing screws (2) of the element to be
substituted (3); remove the heating element from the support from the other side; remove it,
including the wiring, and disconnect it.
Electric components of the electric oven (fig. 55, p. 17)
In order to replace the selector (4) and the thermostat (3) of the electric oven, unscrew the fixing
screws of the control board (1) and of the protection (2); move them; remove them. Disconnect the
electric cables of the component and replace it. Then, connect the electric cables following the
instructions of the wiring diagram.
Electric oven elements (fig. 56, p. 18)
In order to replace the heating elements of the oven, extract the wire grill, the bottom (1), the top
diffusor and the grill holders. Then, unscrew the fixing screws (2) of the element to be substituted
(3); remove the heating element from the support from the other side; remove it, including the
wiring, and disconnect it.
Information for electrical and electronic devices used in EU countries
The devices, which are marked with the following symbol , may not be disposed of with
household refuse in accordance with the EU directive.
To eliminate your used device, please use the country-specific differentiated collection systems
available or contact your retailer, when you buy an equivalent device.
By actively using the offered collection systems, you make your contribution to the reuse, recycling
and utilisation of electrical or electronic devices, protecting the atmosphere and the health.
Abusive product disposal by the user is punishable by law with administrative sanctions according
to the Art. 50 and following from the D.Lgs. 22/1997.
WHEN SUBSTITUTING ANY COMPONENTS ONLY ORIGINAL SPARE PARTS
SUPPLIED BY THE MANUFACTURER HAVE TO BE USED. THE OPERATION HAS TO
BE CARRIED OUT BY AUTHORIZED PERSONNEL.
Pag. 86/130