Recommended Fire-Extinguishing Devices; Trouble Shooting - Mondolfo Ferro TB125 Manual De Uso

charge, provided it is of the same type and
has provided the same functions as the product
just purchased.
Any disposal of the product performed in a
different way from that described above will
be liable to the penalties provided for by the
national regulations in force in the country
where the product is disposed of.
Further measures for environmental protection
are recommended: recycling of the internal and
external packaging of the product and proper
disposal of used batteries (only if contained
in the product).
With your help, we can reduce the amount of
natural resources used to produce electrical
and electronic equipment, minimise the use of
landfills to dispose of old products, and improve
quality of life by preventing the discharge
of potentially hazardous substances into the
environment.
RECOMMENDED
FIRE-EXTINGUISHING
DEVICES
For the choice of the most suitable extin-
guisher, see the following table.
Materials
dry
Water YES
Foam YES
Powder YES*
CO2 YES*
WARNING
The indications given in this table are of a
general nature and should be used as a gen-
eral guide. The possible uses of each type
of extinguisher must be requested from the
manufacturer.
- E - User Manual TB125
nglIsh
Liquids Equipment
inflammable electric
NO NO
YES NO
YES YES
YES YES

TROUBLE SHOOTING

After switching the main switch lo-
cated on the electric control unit, the
main indicator light will remain off
and the controls will not work.
No current
• No current, provide power
After switching the main switch, the
main indicator light will turn on but
the hydraulic power unit motor and/or
turntable rotation motor will not work.
The thermal magnetic switch that protects
the motor was activated.
• Open the electrical board, move the main
switch to 0, then reactivate the overload
cut motor protector using the switch (A,
fig.43); when complete, reclose the electri-
cal board.
Fuses blown
• Open the electrical board, moving the main
switch to 0, then recheck the primary of the
transformer fuses and replace them if neces-
sary (B, fig.43); when complete, reclose the
electrical board.
B A
43
67