INSTALLATION
WARNING
Take the utmost care when unpacking, as-
sembling, lifting and setting up the machine
as indicated below.
Failure to observe these instructions can
damage the machine and compromise the
operator's safety.
Remove the original packaging materials after
positioning them as indicated on the packaging
and keep them for possible future shipping.
Installation clearances
WARNING
Choose the place of installation in strict
observance of local regulations regarding
safety in the workplace.
The floor must be able to support a load equal
to the sum of the weight of the equipment
plus the maximum load allowed, taking into
consideration also the resting base and any
fixing means envisaged.
Position the machine in a manner that guar-
antees access to all four sides. In particular,
check the minimum clearance required for the
work indicated in Fig. 5:
- at the rear for wheel loading and unloading;
- at the front to be able to view the work be-
ing performed.
1500
- E
- User Manual TB125
nglIsh
IMPORTANT: for correct, safe use of the
equipment, we recommend a lighting level of
at least 300 lux in the place of use.
WARNING
If the machine is installed outdoors, it must
be properly sheltered under a roof.
Ambient working conditions
- Relative humidity: 30-95% without condensation
- Temperature range: 0° — +55°
WARNING
Use of the machine in a potentially explosive
atmosphere is not permitted.
Fixing to the ground
It is not necessary to anchor the machine to the
ground, which must simply not be uneven to
permit the platform wheels to slide easily.
If the machine is to be fixed to the ground,
use M16 expansion bolts in the areas indicated
in Fig.6.
5
6
41