Siemens SITRANS FUS1010 Guia De Inicio Rapido página 3

Quick Start Guide
Quick Start Guide Safety Information
for Hazardous Areas
Death or severe personal injury and/or equipment and property damage will result if proper
Hazardous (Classified) Locations installation precautions are not taken.
The use of unauthorized parts in the repair of the equipment, tampering by unqualified personnel, or
operation with the cover open in a Hazardous (Classified) Location will result in dangerous
conditions which will cause death, serious injury, and/or equipment and property damage.
Follow all safety instructions contained or referenced herein.
EXPLOSION HAZARD
Death or severe personal injury and/or equipment and property damage will result due to improper
installation or use of this equipment when located in a Hazardous (Classified) Location.
Install as directed.
Disconnect power source before servicing.
Keep cover closed when equipment is operating.
Qualified Personnel
This flow meter system may only be set up and used in conjunction with this Quick Start Guide and the
instructions on the electronic media provided. Installation, maintenance and operation of the flow meter system
may only be performed by qualified personnel. Within the context of this Quick Start guide, qualified persons are
defined as persons who have the skills and knowledge related to the construction and operation of the electrical
equipment and installations and have received safety training to recognize and avoid the potentially explosive
hazards involved.
NOTE:
THIS QUICK START GUIDE DOES NOT PURPORT TO COVER ALL DETAILS OR VARIATIONS IN EQUIPMENT, OR TO PROVIDE
FOR EVERY POSSIBLE CONTINGENCY TO BE MET IN CONNECTION WITH INSTALLATION, OPERATION OR MAINTENANCE. SHOULD
FURTHER INFORMATION BE DESIRED OR SHOULD PARTICULAR PROBLEMS ARISE, WHICH ARE NOT COVERED SUFFICIENTLY FOR
THE PURCHASER'S PURPOSES, THE MATTER SHOULD BE REFERRED TO THE LOCAL SIEMENS SALES OFFICE OR THE SIEMENS
HAUPPAUGE TECHNICAL SERVICE GROUP AT 800 275-8478. THE CONTENTS OF THIS QUICK START GUIDE SHALL NOT BECOME
PART OF OR MODIFY ANY PRIOR OR EXISTING AGREEMENT, COMMITMENT OR RELATIONSHIP. THE SALES CONTRACT CONTAINS
THE ENTIRE OBLIGATION OF SIEMENS. THE WARRANTY CONTAINED IN THE CONTRACT BETWEEN THE PARTIES IS THE SOLE
WARRANTY OF SIEMENS. ANY STATEMENTS CONTAINED HEREIN DO NOT CREATE NEW WARRANTIES OR MODIFY THE EXISTING
WARRANTY.
3