LUCCI AIRFUSION CLIMATE III Manual Del Usario página 8

Airfusion Climate III Installation Instructions
INSTALLATION OF THE HANGER (Fig.5)
1. Install the decorative cover onto the down rod and cover the coupling parts. Carefully slide the canopy
onto the down rod.
2. Reinstall the ball joint and dowel pin back to the down rod and secure by tightening the set screw.
INSTALLATION OF BLADE (Fig.6)
1. Insert the blade into the slot of rotating member of fan motor assembly.
2. Align and engage the holes of the blade to the blade bracket.
3. Secure the blade to the fan motor assembly by tightening the 3 blade screws and washers.
Ensure all screws are tightened evenly to reduce the chance of warping or unbalancing.
Take care not to over tighten the screws, as this can damage the blades
4. Repeat the same process for the other blades.
7 | P a g e
Fig. 5
Fig. 6
V1.1-EU (10/ 2019)