Installation; Unpacking; Positioning.the.water.purifier - Bluewater RO400A Manual Del Usuario

examples of rejection for substances which may be present in water
INORgaNIC SUbSTaNCES
Turbidity (cloudiness)
Colour rating
Cations/metals
Sodium
Potassium
Calcium (hardness)
Aluminium
Iron
Manganese
Cations/heavy metals
Copper
Lead
Zinc
Mercury
Cadmium
Chrome
Nickel
anions
Fluoride
Chloride
Nitrate
Sulphate
* RO400B/RO400BC/RO400BCV
Sodium and chloride are not separated in the same extent because of the high salt content.

unPaCkinG

• If the appliance has been damaged during transportation,
you should immediately notify the company responsible for
delivering it.
• Carefully lift out the water purifier by taking hold of the rear
handle and the front edge. The water purifier can be dam-
aged if it is lifted in any other way.
• Check the purifier for any signs of damage and check that no
accessories are missing. Any damage, faults or missing parts
should be notified to the supplier immediately.
• Do not leave packaging material lying around so that chil-
dren can play with it.
teChniCal faCts
ORgaNIC SUbSTaNCES
%
hydrocarbons
>99
>99 Heptane, octane, decane, etc.
Benzene, toluene, xylene,
Ethyl benzene, etc.
>96 >9*
Diesel oil
>97
>99 Polyaromatic hydrocarbons
>99 PAH
>99
Chlorinated hydrocarbons
>99
Compounds which can form
when water is chlorinated
>99
Trihalomethanes (Thm)
>99
Trichloromethane
>99
Bromodichloromethane,
>99
dibromochloromethane,
>99
tribromomethane
>98
Pesticides
>99
PCB
mICRO-ORgaNISmS
>99
Heterotrophic bacteria
>98 >95*
Coliform bacteria/E.Coli
>97
>97

installation

PositioninG the Water Purifier
Remember the following when installing the water purifier:
• The purifier is installed upright, without support, on a hori-
zontal surface that can take the load.
• The installation space should be close to cold water supply,
drainage and an earthed electrical supply.
• It should be easy to inspect the control panel.
• It should be possible to open the front cover so that the filter
containers can be accessed.
• The water purifier should be installed with a  cm gap to any
adjacent fittings or walls to ensure good ventilation around
the appliance.
• Connections can be routed in any direction from the connec-
tion point. Make sure no connections are crushed or dam-
aged. Hoses and cables must not be tensioned. The dimen-
sions of the area required for the water purifier are specified
in FIG.7.
EN11
%
>98
>99
>99
>99
>99
>60
>99
>99
>99
>99