Tabla de contenido
Idiomas disponibles
Idiomas disponibles
- EN -
6.5.2
In: Time-dependent cleaning "Interval"
In addition to automatic cleaning, the unit can also perform a time-dependent cleaning cycle.
This is particularly useful for ponds containing fish, because even if there is only a small amount
of dirt, excrement is always removed from the water cycle before it leads to a build-up of nutri-
ents.
Adjust the time interval to meet the requirements. The optimum setting of the drum filter module
is usually a time interval of 20 minutes (default setting). The function is deactivated at a time
setting of 0 minutes.
The time-dependent cleaning cycle does not have any influence on the automatic cleaning cycle
that starts when the water level is too low. After each automatic cleaning cycle, the time interval
is reset and starts again from the beginning.
Proceed as follows
1.
Press
several times until In appears
in the display.
2.
Press
for 5 s until the time is indicat-
ed in the display.
3.
Press
several times to change the
value.
• To change the value quickly: Hold down
the button.
6.5.3
EC: Extended cleaning time "Extra Cleaning"
To prevent larger deposits from building up in the dirt channel or pipework, the unit has an ex-
tended cleaning time option. The extended cleaning time starts after a definable number of
cleaning cycles. (→ IE: Interval of the extended cleaning time "Interval Extra Cleaning")
You can increase the cleaning time to flush out the pipe with additional water. The default setting
for the extended cleaning time is 20 s.
Proceed as follows
1.
Press
several times until EC appears
in the display.
2.
Press
for 5 s until the cleaning time
is indicated in the display.
3.
Press
several times to change the
value.
• To change the value quickly: Hold down
the button.
72
Information
• To cancel and exit the menu: Either wait for 10 s or press
.
• To cancel and exit the menu: Either wait for 5 s or press
.
• Adjustable range: 0.3 – 60 min
• 0 min: No time-dependent cleaning
• Increment: 1 min
• The number can only be changed upwards. Once the value 60 is
reached, the display returns to 0.
• Saving the set value: Wait for 5 s until the menu is automatically
exited.
• Cancel without saving and exit the menu: Press
Information
To cancel and exit the menu: Either wait for 10 s or press
.
To cancel and exit the menu: Either wait for 5 s or press
• Adjustable range: 10 s – 9 min.
− A value in minutes is displayed with a line on the display (e.g. 6').
• Increment for 10 – 59 s: 1 s
• Increment for 1 – 9 min: 1 Min.
• The number can only be changed upwards. After the value 9 min,
the display
• returns to 10.
• Saving the set value: Wait for 5 s until the menu is automatically
exited.
• Cancel without saving and exit the menu: Press
or
or
or
.
or
or
.
or
.
Capítulos
Tabla de contenido
