Monitoring The Device; Usb Interface - Kaco blueplanet 29.0TL3 Serie Manual

9 | Configuration and operation
Núm. de pu. de ap.
4 4
1 2 3
2 - 5
Power
0.0 – 100.0 [%]
Voltage
0.0 – 126.0 [%]
Password protection
Status
Activation threshold
1 2 3 4 4
230V – 276V
Deactivation threshold
1 2 3 4 4
230V – 276V
Upload/download
1
2 3 4
Download service log
data
Download service log
data without yields
Download a set of pa-
rameters
Document a set of pa-
rameters
Transfer a set of para-
meters
AVISO
With regard to the selection of country settings, KACO new energy attests:
1. that the relevant certificates are only valid if the corresponding country settings have been selec-
ted.
2. that all configured grid parameters must be configured in accordance with the requirements of the
grid operators.
3. that the configuration of parameters using IEEE 1547: 2003 table 1 is possible but is only permit-
ted if it is requested by the grid operators.
AVISO
Ajuste de los valores según el pictograma
tivo blueplanet 125TL3. Para su dispositivo, observe el control deslizante en la interfaz web.
9.5

Monitoring the device

The device has an integrated web server. This makes it possible to monitor and record the operating
state and yield of your PV system.

USB interface

Use an external USB storage device to read operating data saved on the device.
Página 56
F Specify the number of nodes.
F Specify power for 1st, 5th ... node as a percentage of the maximum
power.
1. Specify voltage for 1st, 5th ... node as a percentage of the ma-
ximum voltage.
2. Activate optional password protection.
3. Confirm the action field.
F Specify the activation threshold.
AVISO: If the 10 min mean value of the voltage exceeds the
activation threshold, then the function is enabled. The power
level is adjusted in such a way that the instantaneous effective
voltage value does not exceed the activation threshold value.
. AVISO: If the 10 min mean value of the voltage falls below
the deactivation threshold, then the function is disabled.
1. Specify the deactivation threshold.
AVISO: Opportunity to save log files and save and import pa-
rameter data
F Save service log data to external storage media.
F Save log data without yields to external storage media.
F Save a set of parameters to external storage media.
F Issue or print documentation of a set of parameters as a PDF.
F Load a set of parameters from external storage media.
La siguiente información sólo se aplica al tipo de disposi-
Manual
Kaco blueplanet 29.0TL3