Kaco blueplanet 29.0TL3 Serie Manual página 51

Manual
Modo de funcion. –
4 4
1 2 3
On | Off
Ajustes | Manual |Co-
rriente cero predefini-
da
Prioridad – Limitación
de corriente reactiva |
Prioridad corriente act.
Bajada secuencia pos.
1 2 3 4 4
constante K &
Subida secuencia pos.
constante K
k 0 – 10
Subida secuencia neg.
1 2 3 4 4
constante K
Subida secuencia neg.
constante K
k 0 – 10
Banda muerta
1 2 3 4 4
0 - 100 [% Uref]
10.0
Solo cor. react. din.
1 2 4 4
3
Off | On
Modo banda inact.
1 2 3 4 4
Mode 1 | Mode 2
Tensión de ref.
1 2 3 4 4
U< - U>
Tensión de servicio mí-
1 2 3 4 4
nima
45 – 125.0 [% Unom]
&
Tensión de servicio má-
xima
45 – xxx [% Unom]
Password protection
Status
Zero current undervol-
1 2 3 4 4
tage threshold
Energía total
0 – 184 V / 253 – 340
V
Contador de energía
1 2 3 4 4
0 – 100 % [ % Imax]
Kaco blueplanet 29.0TL3
Configuration and operation | 9
F Select a control process.
On: Activates dynamic grid support using dynamic reactive current.
Off: Deactivates dynamic grid support using dynamic reactive current.
Dynamic grid support remains active on account of immunity to interfe-
rence.
F Select a control process.
F Select a control process.
F Set amplification factor k for the pos. sequence for drop and increase
in the grid voltage.
2
F Set amplification factor k for the neg. sequence for drop and increase
in the grid voltage.
2
F Set dead band in %.
AVISO: With FRT mode activated, the pre-fault reactive cu-
rrent can be added.
F If necessary, activate pre-fault reactive current.
F Select dead band mode for the active control process.
F Set reference voltage for the active control process.
F Set voltage range for the active control process.
F Set the voltage threshold for zero current mode.
F Set the reactive power limitation.
Página 51