Kaco blueplanet 29.0TL3 Serie Manual página 54

9 | Configuration and operation
Potencia aparente má-
4 4
1 2 3
xima Slim
1000 – S
Potencia efectiva máxi-
1 2 4 4
3
ma Plim
1.0 - 100.0 [% Slim]
Password protection
Status
Gradiente salida ascen-
1 2 3 4 4
diente & Gradiente sa-
lida decreciente
1 - 65534 [% / min]
EPC (extended power
1 2 3 4 4
control)
Potencia de reserva
0 – 1000 %
Timeout
3 – 100000 s
Limitación de arranque
1 2 3 4 4
activa
Pendiente del limitador
de arranque
1 – 600 [% / min]
Limitador de arranque
en cada conexión
Status
Limitador de arranque
en la primera conexión
Status
Limitador de arranque
tras error de la red
Status
Prot. por contraseña
Status
Modo de prioridad
1 2 3 4 4
Prioridad Q | Priori-
dad P
Página 54
AVISO: The max. apparent power limits the internal power of
the device.
[VA]
More detailed information at:
max
Other grid-supporting functions that are effective in the case of
active power [Ver capítulo 10.4} Página 74]
F Enter the value or set the value using the slider.
The apparent power is limited globally to the configured value in VA. All
active and reactive power control values use S
100 %, if S
More detailed information at:
Other grid-supporting functions that are effective in the case of
active power [Ver capítulo 10.4} Página 74]
F Enter the value or set the value using the slider.
Active power is limited globally to the configured value in % S
1. Optional: Activate password protection.
2. Confirm the action field.
F Specify the increasing and decreasing output gradient.
AVISO: EPC settings
1. Set fallback power.
2. Set time until shutdown takes place.
3. Apply the values using the Apply button.
AVISO: Power ramp-up is used to ramp up the power gra-
dually
F Set increase.
1. Activate option.
2. Activate optional password protection.
3. Confirm action field
F Set priority for reactive power – Q or active power – P.
AVISO: When it comes to P priority, the reactive power adjust-
ment range is limited subject to the active power that is cu-
rrently available and fed in.
Manual
is configured.
lim
instead of S as
lim max
or S .
lim max
Kaco blueplanet 29.0TL3