Kaco blueplanet 29.0TL3 Serie Manual página 52

9 | Configuration and operation
Minimum support time
4 4
1 2 3
1000 – 15000 ms
Cond. de conexión
1
2 3 4
Min. switch-on voltage
1
2 3 4
after grid monitoring
Max. switch-on voltage
after grid monitoring
207 [V] - 253 [V]
Min. switch-on fre-
1
2 3 4
quency after grid moni-
toring
Max. switch-on fre-
quency after grid moni-
toring
47.50 [Hz] – 50.07
[Hz]
Tensión de conexión
1
2 3 4
mín. tras error de la
red
Tensión de conexión
máx. tras error de la
red
Frecuencia de conexión
1
2 3 4
mín. tras error de la
red
Frecuencia de conexión
máx. tras error de la
red
Tiempo de observación
1
2 3 4
tensión FV
Tiempo de observación
de la tensión de red
Hora de conexión
1 2 3 4 4
Detección avanzada de
1 2 3 4 4
red de isla
Modo de servicio RO-
4
1 2 3 4
COF pasivo
Modo de servicio RO-
COF activo
ROCOF ampl.
1 2 3 4 4
Cambio de frecuencia
1 2 3 4 4
Off | On
Página 52
F Set the minimum support time.
AVISO: The device checks the grid voltage and grid frequency.
The grid feed-in mode begins if the measurements are within
the set ranges.
F Set minimum and maximum values ​ ​ f or connection.
F Set min. and max. switch-on voltage after grid monitoring.
F Set min. and max. switch-on frequency after grid monitoring.
F Set min. and max. switch-on voltage after grid monitoring.
F Set min. and max. switch-on frequency after grid monitoring.
F Set time for voltage monitoring.
F Set time for voltage monitoring.
F Set wait time for grid monitoring.
NOTE: Grid operators require shutdown of the device with standalone
grid detection
Advanced islanding detection [Ver capítulo 10.5} Página 75]
F Activate passive grid influence by application of a frequency.
Off | On
F Activate active grid influence by application of a frequency.
Off | On
F Activate active grid influence by additional reactive power feed-in.
F Activate frequency shift.
Manual
Kaco blueplanet 29.0TL3