Kaco blueplanet 29.0TL3 Serie Manual página 41

Manual
Country- Me- Display/
spec. nu Setting
Settings le-
vel
Guardar en USB
1 2 3 4 4
Ajustes
1 2 3 4 4
Idioma
1
2 3 4
Def. rend. tot.
1
2 3 4
Interfaz
1
2 3 4
Priwatt
1
2 3 4
Modo de activac.
1 2 3 4 4
Tiempo de observ.
1 2 3 4 4
Umbral de potencia
1 2 3 4 4
Modo de funcion.
1 2 3 4 4
Tiempo de funcion.
1 2 3 4 4
Enc. rápido
1
2 3 4
Intervalo registro
1
2 3 4
Cop. seg. datos reg.
1
2 3 4
Pantalla
1
2 3 4
Kaco blueplanet 29.0TL3
Configuration and operation | 9
Action in this menu/meaning
AVISO: Opportunity to export the operating data to a connec-
ted USB storage device.
↻ You have connected a USB storage device to the device.
1. Select the data to be exported (year, month or day).
2. Press the Enter button.
ð The device writes the data to a connected USB storage devi-
ce.
F Open the menu: Press the Right arrow button or Enter
button.
F Select the required language for the user interface.
AVISO: You can set the total yield to any value, for example,
when you have received a replacement unit and want to conti-
nue the recording from the present value.
F Select the Save button and confirm with the Enter button.
AVISO: The address must not be the same as the address of
another device or a Powador-proLOG device.
F Assign a unique RS485 bus address to the device.
F Open the menu: Press the Right arrow button or Enter
button.
AVISO: Re-activation depends on the operating mode selected
and on the activation conditions.
F Activate function for a cycle
F Set time span during which the power threshold must be exceeded
without interruption.
F Set power threshold from which the monitoring time up to activation
begins.
1. Power-dependent: the function remains active until below the
set power threshold.
2. Time-dependent: The function is active independent of the
sunlight for the set operation time.
AVISO: The menu option is only available in "Time-depen-
dent" operation mode.
F After connection, the function is active for the set operation time.
F Reduce the waiting times during the self-test by pressing theActi-
vate button.
F Specify the time period between 2 log data recordings.
AVISO: The device supports the backing up of all recorded
yield data to a connected USB storage device.
F Activate or disable log data backup.
1. Configure the contrast setting for the display.
2. Set the length of time without user input after which the back-
lighting of the LCD switches off.
3. Alternatively: Permanently activate or disable the backlighting
by selecting "On" or "Off".
Página 41