Fastening The Mount; Opening The Device; Making The Electrical Connection; Connecting The Device To The Power Grid - Kaco blueplanet 50.0 TL3-S Manual Del Usuario

ž Minimum clearance during installation: See comprehensive operating instructions under
ergy.com/de/downloads
3.2 Tools used
Code (s)
External hexagon
W
Internal hexagon
A
Torx
T
Slot
S
Tab. 1: Key and description of tool codes
3.3

Fastening the mount

WARNING
Hazard when using unsuitable fixing materials!
If unsuitable fixing materials are used, the device could fall and persons in front of the device may be seri-
ously injured.
› Use only fixing materials that are suitable for the mounting base. The fastening materials supplied are
only to be used for masonry and concrete.
› Only install the device in an upright hanging position.
4 Installation
4.1

Opening the device

↻ Mount the device to the wall.
↻ Wipe off any moisture on the housing door frame to nullify any potential liabil-
ity this could cause.
1 Open the housing door by unlocking the upper and lower lock with the double-
bit key provided.
2 Open the housing door carefully.
» Proceed with the installation of the device.
4.2

Making the electrical connection

NOTE
Select conductor cross-section, safety type and safety value in accordance with the following basic condi-
tions:
Country-specific installation standards; power rating of the device; cable length; type of cable installation;
local temperature
Detailed information on tightening torques: See comprehensive operating instructions under
ergy.com/de/downloads
4.3

Connecting the device to the power grid

4.3.1 Prepare the grid connection

Page 6
Shape of the
connector
Tightening torque
Spanner size or number
Outer contour
Fig. 1: Form pattern
Fig. 2: Open the door lock
Photovoltaic feed-in inverter KACO blueplanet 50.0 + 60.0 TL3
www.kaco-newen-
Nm
Close
Close
Open
Open
http://www.kaco-newen-