Web Server - Kaco blueplanet 29.0TL3 Serie Manual

Manual
Reading log data
1. Connect a suitable USB storage device to the USB interface on the connection circuit board.
2. Open the "Log data view" menu.
3. Select "Save to USB".
4. Select the desired log data using the 4-way button.
5. Press the Enter button.
ð The device saves the selected log data to the USB storage device.
AVISO
The USB interface is approved solely for use with USB flash storage devices ("USB sticks"). The maxi-
mum available current is 100 mA. If a device with a higher power requirement is used, the power
supply for the USB interface automatically shuts down to protect the device from damage.

Web server

This device has an integrated web server. After configuring the network and activating the web server in the
Settings menu, you can open the web server from an internet browser. The language version of the website de-
livered by the web server is adapted dynamically to the pre-set language preferences in your Internet browser. If
your Internet browser requests a language that is unknown to the device, the web server uses the menu langua-
ge set in the device.
↻ You have connected the device to your network.
1. When using a DHCP server: Activate DHCP.
2. For manual configuration (DHCP off):
3. Open the Settings/Network menu.
4. Assign a unique IP address.
5. Assign a subnet mask.
6. Assign a gateway.
7. Assign DNS server.
8. Save your settings.
Using the web server
To avoid problems with incompatibility, use the most recent version of your Internet browser. JavaScript must be
enabled in the browser settings to display the web server correctly.
AVISO
You can also access the web server of the device via the Internet. To do this, additional settings of
your network configuration, particularly your internet router, are required. Note that communication
with the device is carried out over an unsecured connection, particularly in the case of a connection
via the internet.
↻ Configure the Ethernet interface.
↻ Connect the Ethernet cable.
1. Open an Internet browser.
2. In the address field of the internet browser, enter the IP address of the device and open the site.
ð The internet browser displays the home screen of the web server.
After it has opened, the web server displays information about the device as well as the current yield data.
– Feed-in power
– Status
– Grid power
Kaco blueplanet 29.0TL3
Configuration and operation | 9
– Generator power
– Generator voltage
– Unit temperature
Página 57