Ebotics Arm Robot Manual Del Usuario página 49

REQUIRED PIECES
BASE2
STEP 2
Attach the Servomotor to BASE2
F2_A
Servomotor
*Note: You will not
always use all the
D1
Servomotor pieces.
X2
M3/8
*The Servomotor cables must go through the
D1 piece gap (F2_A).
F2_B
Note: When threading the M3/8
screws into BASE2 you must leave
the same space (F2_B) on each side
and the screws tips should not go
through the BASE2 surface.
S1
ID code to
identify the
SERVO for
the board
connections.
ARM ROBOT MANUAL
*
49