Honda NX4 Falcon Manual Del Propietário página 131

50
Engine Oil
Engine oil quality is the chief factor affecting engine
service life. Change the engine oil as specified in the
maintenance schedule (page 45).
When running in very dusty conditions, oil changes
should be performed more frequently than specified in
the maintenance schedule.
Please dispose of used engine oil in a manner that is
compatible with the environment. We suggest you take it
in a sealed container to your local recycling center or
service station for reclamation. Do not throw it in the
trash or pour it on the ground or down a drain.
Used engine oil may cause skin cancer if repeatedly left
in contact with the skin for prolonged periods. Although
this is unlikely unless you handle used oil on a daily
basis, it is still advisable to thoroughly wash your hands
with soap and water as soon as possible after handling
used oil.
Changing the oil requires a torque wrench. If you do
not have it and the necessary skill, we recommend
that you have your Honda dealer perform this service.
If a torque wrench is not used for this installation, see
your Honda dealer as soon as possible to verify proper
assembly.
Change the engine oil with the engine at normal
operating temperature and the motorcycle on its side
stand to assure complete and rapid draining.
1. Start the engine and let it idle for a few minutes.
2. Stop the engine, place an oil drain pan under the
crankcase. Remove the oil filler cap/dipstick, the oil
tank drain bolt (1) on the right crankcase and
crankcase drain bolt (2) on the left crankcase.
3. After the oil has drained, make sure the sealing
washers on the drain bolts are in good condition.
4. Install the drain bolts to the specified torque.
Crankcase drain bolt torque:
25 N·m (2.5 kgf·m, 18 lbf·ft)
Oil tank drain bolt torque:
26 N·m (2.7 kgf·m, 20 lbf·ft)
(2)
(1)
Owner´s Manual
(1) Oil tank drain bolt
(right crankcase)
(2) Crankcase drain bolt
(left crankcase)