30
Right Handlebar Controls
Engine Stop Switch
The engine stop switch (1) is next to the throttle grip.
When the switch is in the
will operate. When the switch is in the
position, the engine will not operate. This switch is
intended primarily as a safety or emergency switch
and should normally remain in the
If your motorcycle is stopped with the ignition switch
ON and the engine stop switch
and tail light will still be on, resulting in battery
discharge.
Start Button
The start button (2) is below the engine stop switch (1).
When the start button is pressed, the starter motor cranks
the engine, the headlight will automatically go out, but
the tail light will stay on. See page 36 for the starting
procedure.
(1)
(2)
(RUN) position, the engine
(OFF)
(RUN) position.
(OFF), the headlight
(1) Engine stop switch
(2) Start button
Left Handlebar Controls
Headlight Dimmer Switch (1)
Push the dimmer switch to
or to
(LO) to select low beam.
Turn Signal Switch (2)
Move to
to signal a left turn, or to
turn. Press to turn signal off.
Horn Button (3)
Press the button to sound the horn.
(1)
(2)
(3)
Owner´s Manual
(HI) to select high beam
to signal a right
(1) Headlight dimmer switch
(2) Turn signal switch
(3) Horn button