Honda NX4 Falcon Manual Del Propietário página 103

22
1. Pull back the rubber dust cover (2).
2. Loosen the lock nut (3) and turn the clutch cable
adjuster. Tighten the lock nut and check the
adjustment.
3. If the adjuster is threaded out near its limit or if the
correct free play cannot be obtained, loosen the
lock nut and turn in the cable adjuster completely.
Tighten the lock nut and install the dust cover.
4. Loosen the lock nut (5) at the lower end of the cable.
Turn the adjusting nut (6) to obtain the specified free
play. Tighten the lock nut and check the adjustment.
(3)
(B)
(A)
(4)
5. Start the engine, pull in the clutch lever and shift
into gear. Make sure the engine does not stall and
the motorcycle does not creep. Gradually release
the clutch lever and open the throttle. The
motorcycle should begin to move smoothly and
accelerate gradually.
(2) Dust cover
(2)
(3) Lock nut
(4) Clutch cable adjuster
(A) Increase free play
(B) Decrease free play
If proper adjustment cannot be obtained or the clutch
does not work correctly, see your Honda dealer.
(A)
(B)
(6)
(5)
Other Checks
Check the clutch cable for kinks or signs of wear that
could cause sticking or failure. Lubricate the clutch
cable with a commercially available cable lubricant to
prevent premature wear and corrosion.
Owner´s Manual
(5) Lock nut
(6) Adjusting nut
(A) Increase free play
(B) Decrease free play