Network Access; Network Settings - Intelbras TIP 200 LITE Guia De Instalacion

Network access

• DHCP: the IP telephone will receive an IP address, mask and gateway
supplied automatically by a DHCP server, making manual configuration
unnecessary. If the IP telephone does not receive the network settings, check
to see if the IP telephone is configured as a DHCP .
• Fixed IP: the IP address, mask and gateway will be configured manually
by the user or the network administrator.
• PPPoE: when the modem is in Bridge mode and the IP telephone functions
as a PPPoE and router, ADSL authentication is performed by IP telephone.

Network settings

Static IP (fixed)
1. Press Menu, use the
2. Use the
3. Use the alphanumeric keypad to enter the password (factory default:
admin) and press
4. Use the
5. Use the
6. Use the
7. Use the alphanumeric keypad to enter the number of the IP address and
press ;
8. If the address entered is not valid, the following warning will appear on
the display: "Warning Invalid Value";
9. If the address does not belong to the mask of the sub-network and the
default gateway, these must also be configured.
Note: press , or wait 1 minute and the
settings will be applied.
PPPoE
1. Press Menu, use the
2. Use the
3. Use the alphanumeric keypad to enter the password (factory default:
admin) and press
4. Use the
5. Use the
6. Use the
7. Use the alphanumeric keypad to enter the PPPoE user;
8. Use the
user, and press
key to select Settings and press
keys to select Advanced and press;
;
keys to select Network and press
keys to select WAN Port and press
keys to select Static IP and press
key to select Settings and press
keys to select Advanced and press
;
keys to select Network and press
keys to select WAN Port and press
keys to select PPPoE and press
keys to select PPPoE PWD, enter the password of the PPPoE
.
;
;
;
device will reinitialize and the new
;
;
;
;
;
;
39