Intelbras TIP 200 LITE Guia De Instalacion página 41

1. Press ;
2. Using the navigation keys,
3. Using the navigation keys,
4. Check the IP number under item LAN IP
Setup of the VoIP account
After verifying the IP number, input it in the internet browser. On the next
screen, input user name and password (the factory default for both is: admin)
and the device configuration page will appear. Follow the procedures below:
1. The Status shows the system information;
2. In the Account window, under option Basic, you will find the option to
configure the VoIP numbers of the operator accounts;
3. In the Account field, select the account you want to configure (1 or 2);
4. In the Account Active field, select Enabled;
5. Input the name to be shown on the screen and the name to appear on
the display of the destination telephone;
6. Input the VoIP data, name of the registry in the SIP server, user name pro-
vided by the SIP server, and authentication password for the SIP account;
7. Input the URL or IP address of your VoIP operator in the SIP Server field;
8. To confirm all the changes, click on Confirm button located at the bottom
of the configuration page;
9. Wait for a moment and the name/number inputted in the Display Name
field will appear on device;
10. Click on Codec to configure the options, according to the operator's re-
quest. Click on the desired codec and on the appropriate arrow (move it
to the right to enable it or to the left to disable it);
11. Click on Confirm.
Note: it is possible to access the IP telephone configuration page from any
computer as long as it is connected to the same network.
To access the registered accounts
1. Using the navigation keys,
have been enabled;
2. The selected account will appear on the display. Type in the desired number.
select More... and press
select Network and press
using the navigation keys.
select account 1 or 2, if both of them
;
;
41