Voip Settings - Intelbras TIP 200 LITE Guia De Instalacion

Note: press
settings will be applied.
After confirmation, it will be possible to access the Internet. Continue with the
following configuration.

VoIP settings

After configuring the network, it is necessary to have information from your
VoIP operator in order to be able to make your calls. This device supports up
to two different operator accounts. The information from each operator is to
be included in the setup page of the IP telephone using an internet browser
(for example, Internet Explorer
Setup via the device
1. Press Menu and, using the navigation keys
2. Using the navigation keys,
3. Input your password using the alphanumeric keypad (factory default:
admin) and press
4. Using the navigation keys,
5. Using the navigation keys,
2) and press
6. Using the navigation keys,
7. Using the navigation keys,
setup, such as the name to be displayed on the screen, identification name
to be displayed on the destination phone, registry name of the SIP server,
user name provided by the SIP server, SIP account password, and server;
8. Input the values for each option using the alphanumeric keypad and
press
Configuration via an internet browser
IP address verification
In order to access the device configuration page, verify the IP address using
the following steps:
• DHCP mode/static IP
1. Press ;
2. Verify the IP number shown on the screen.
• PPPoE mode
When the IP telephone is configured in the PPPoE mode, the user must be connec-
ted to the LAN port of the device in order to be able to access the configuration
page. Check the LAN network address according to the following procedure:
40
or wait 1 minute and the device will reinitialize and the new
;
;
to save.
) or using the device.
®
select Advanced and press
select Accounts and press
select the account to be activated (1 or
select the Enable option;
select one of the 12 options you wish to
select Settings and press
;
;
;