Time Zone Change Mode; Time Setting Mode - Terragene Bionova IC10/20FR Manual Del Operador

Features, care, cleaning and maintenance

Time zone change mode

This function allows you to advance or delay the internal
incubator clock in order to adopt a different time zone.
Enter Time zone change mode
De-energize the incubator.
Press and hold both
Time
energize the equipment. A beep will be emitted to
indicate access to Time zone change.
NOTE: when entering Time zone change mode a
green light will turn on in one of the incubation/
reading position. This number corresponds to the cu-
rrent incubator time.
Time zone change
To advance time, press
hours you need to advance. To delay time press
button as many times as hours you need to delay.
Advance
buttons simultaneously and
button as many times as
Delay
IC10/20FR Page 14
NOTE: 37 °C light indicates a.m. 60 °C light indicates p.m.
a.m. p.m.
Complete time zone change
To save changes press and hold
4) for three seconds. A beep will sound indicating that
process has been completed successfully. A ticket
with the new set time will be printed.
Figure 4
Cancel time zone change
To cancel time zone change process without saving
the changes, disconnect power source.

Time setting mode

Time setting functionality allows you establish a spe-
cific time regardless of incubator current time.
Enter Time setting mode
De-energize the incubator.
Press and hold both
Time
multaneously and energize the equipment. A beep
will be emitted to indicate access to Time setting
mode.
button (Figure
buttons and button si-