Thermal Paper Specifications; Replacement Of The Paper Roll; Time Zone Change Mode - Terragene IC10FR Manual Del Usuario

Instructions for use

Thermal paper specifications

Recommended paper: JUJO AF50KSE3 or similar (order
code ICTP).
Paper width : 58 mm
Maximum paper thickness: 60 g/m
Maximum diameter size: 50 mm

Replacement of the paper roll

The printer uses thermal paper rolls.

Time zone change mode

This function allows you to advance or delay the internal auto-
reader clock in order to adopt a different time zone.
2
1.To replace the paper
roll, pull the handle of the
printer's door.
2.Open the printer's cover
and remove the spent roll.
3.Place the new paper roll
with the outer side up.
4.Close the printer cover by
pressing on the sides of the
lid.
IC10/20FR Page 10
NOTE: Remember that it is possible to synchronize
the time with the Bioupdate
traceability software.
Enter Time zone change mode
De-energize the auto-reader.
Press and hold both buttons simultaneously and energize
the equipment. A beep will be emitted to indicate access to Time
zone change.
NOTE: when entering Time zone change mode a green
light will turn on in one of the incubation/reading
position. This number corresponds to the current auto-
reader time.
Time zone change
To advance time, press
you need to advance. To delay time press button
times as hours you need to delay.
Advance
software and Bionova
® ®
button as many times as hours
as many
Delay