Thermal Paper Specifications; Replacement Of The Paper Roll; Reprinting Of Results; Remaining Incubation Time - Terragene Bionova MiniBio Manual De Usuario

Instructions for use
POSITIVE NEGATIVE

Thermal paper specifications

Recommended paper: JUJO AF50KSE3 or similar (order
code ICTP).
Paper width : 58 mm
Maximum paper thickness: 60 g/m2
Maximum diameter size: 23 mm

Replacement of the paper roll

The printer uses thermal paper rolls.
CANCELED
1. To replace the paper
roll, pull the handle of the
printer's door. Open the
printer's cover and remo-
ve the spent roll.
2. Place the new paper roll
with the outer side up.
Bionova® MiniBio Page 8

Reprinting of results

The incubator allows reprinting of the last 3 results by
fluorescence readout. For printing the results, press the
button for 3 seconds.

Remaining incubation time

The Bionova® MiniBio allows verifying the remaining in-
cubation time in every reading position by ticket printing.
Whenever a reading process is in course, press and hold
the button for 3 seconds, a ticket will then be printed
informing reading position, incubation program and re-
maining incubation time.
To verify remaining incubation time of 2 or more readings
in course press both 2 buttons
ticket informing remaining incubation time of all positions.

Positive Control

The positive control should belong to the same
batch of the processed BI.
Use a non-sterilized biological indicator as a po-
sitive control every time a processed indicator is
incubated.
3. Close the printer cover
by pressing on the sides
of the lid.
; the device renders a