Setup And Use; Breathing Tube - RPB Z-Link Manual De Instrucciones

SETUP AND USE

BREATHING TUBE

FIGURE 2.1
Insert the threaded end of the breathing tube
(04-835) into the threaded hole in the back
of the Z-LINK and screw the breathing tube
®
in completely without over tightening.
FOR USE WITH RPB PX4 AIR - SEE THE PAPR USER MANUAL
®
When the Z-LINK Respirator is being used in conjunction with the RPB
®
refer to the RPB PX4 PAPR User Instruction Manual for set up and use of the assembly.
®
Note: The RPB PX4 is a Powered Air Purifying Respirator, therefore care must be taken when
®
selecting the correct filter for the application the respirator will be used in.
!WARNING! The Z-LINK
meeting the requirements of CGA G-7.1 Grade D or higher quality.
Supplied Air Respirator must be supplied with respirable air
®
Insert the bayonet end of the breathing tube
into the outlet of the PX4 AIR PAPR and twist
it in until it is secure.
PX4 AIR PAPR, please
®
FIGURE 2.3
11