Papr Setup And Use - RPB PX4 Air Papr Manual De Instrucciones

All manuals and user guides at all-guides.com
PX4 AIR PAPR

PAPR SETUP AND USE

CHARGING THE BATTERY PACK
Fit the battery to the charging station by
connecting the left side and rotate the battery
down and latch into place.
Follow the indicators from left to right on the
front of the charging station to know the status
of the charge process. The triangle warning
light will indicate if there is problem charging.
When all three lights display green, the battery
is fully charged.
10
®
FIGURE 2.1
Connect the power pack to the charging
station. Connect the power pack to the mains
electrical source (110 - 240v), charging will
begin.
FIGURE 2.3
To remove the battery from the charging
station, press the release latch on the bottom of
the battery and lift the battery from the station.
FIGURE 2.2
FIGURE 2.4