RPB Z-Link Manual De Instrucciones página 12

SETUP AND USE
SUPPLIED AIR
FIGURE 2.3
Connect the Breathing Air Supply Hose to the
point of attachment (04-900 Radex® Airline
Filter) shown.
!WARNING! Make sure that the air from
the point of attachment is Grade D or higher
quality and meets OSHA requirements.
FIGURE 25
Now connect the Breathing Air Supply Hose
to the Flow Control Device. Air should be now
flowing through the Respirator.
12
CONTINUED
FIGURE 2.4
Connect the Air Supply Hose to the flow
control device.
NOTE:
Check the hose connections for any
air leaks and tighten if necessary – replace
any worn parts.
FIGURE 2.6
With air flowing through the respirator
adjust the air pressure at the point of
attachment to the recommended pressure as
specified in the Breathing
Air Pressure Table (page 10).