Configuration - RPB Z-Link Manual De Instrucciones

SETUP AND USE - Z-LINK+
IMPACT LENS, ADF LENS AND REAR LENS REPLACEMENT
FIGURE 12.1
Push the tabs inside the weld visor apart to
release the ADF Retainer.
FIGURE 12.3
Remove the Impact Lens by squeezing
together the sides of the Impact Lens. If just
replacing the Impact Lens, then place the
new Impact Lens in and replace the green
ADF Retainer.

CONFIGURATION

®
FIGURE 12.2
Remove the green ADF Retainer.
FIGURE 12.4
To remove the ADF, push down on the tab at
the bottom of the ADF to release it and pull
the ADF out.
21