RPB Z-Link Manual De Instrucciones página 18

SETUP AND USE
SIDE PADDING SYSTEM CLEANING
FIGURE 8.1
Remove the side pads from the covers that
are attached with velcro.
BROW PAD REPLACEMENT AND CLEANING
FIGURE 9.1
To remove the brow pad, stretch the brow pad
over the hooks on the head harness and take
it off. Clean it with mild detergent or replace it
with a new one.
18
CONTINUED
FIGURE 8.2
Wash the pads with mild detergent. Once dry,
reattach them to the side pad covers.
FIGURE 9.2
Replace the brow pad by placing the holes on
one side over the hooks on the head harness
and then wrap the pad over the top of the
head harness. Stretch the pad around the
bottom of the head harness and secure the
holes over the hooks.