Adjusting Pattern Balance; Adjusting Distorted Stretch Stitch Patterns; Adjusting Distortedlettersor Numbers In Red Or Green Mode - KENMORE ELITE 385.19365 Manual De Instrucciones

Adjusting Pattern Balance
If the decorative stitch patterns, letters, numbers or manual
buttonhole stitch are uneven when you sew on a particular
fabric, adjust them with the feed balancing dial
* The machine is set with the feed balancing dial position
with the setting mark as shown.
0 Feed balancing dial
_) Standard setting mark
(_) indication line
Adjusting Distorted Stretch Stitch Patterns
If the patterns are uneven when sewing with a particular
fabric, adjust them by turning the feed balancing dial with a
coin.
When patterns are too compressed, correct by turning the
dial in the direction of "+".
When patterns are too drawn out, correct by turning the
dial in the direction of "-".
Adjusting Distorted Letters or Numbers in
Red or Green Mode
If the letters are uneven when sewn on a particular fabric,
select pattern 8 to test the stitch then turn the feed
balancing dial with a coin.
When the letters or numbers overlap, turn the dial to "+".
When the letters or numbers are too drawn out, turn the
dial to "-'.
®
100