Starting Your First Fire; Fire Characteristics - Pleasant Hearth PH35PS Manual Del Usuario

Ocultar thumbs Ver también para PH35PS:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

F. Starting Your First Fire
1) Turn the dial control to "OFF".
2) Make sure the firepot is clean, in place, and free of
debris.
3) Plug the appliance into the wall and fill the hopper
with wood pellets. Shut the hopper lid.
4) Turn the dial control to the desired burn setting.
The appliance will go into the ignition sequence followed
by start up (The green LED will flash rapidly). The igni-
tion sequence involves the exhaust blower turning on,
the igniter turning on, and the feed motor running in two
stages. The first stage involves the feed motor running
continuously for about a minute to preload pellets into the
firepot. Following the preload and a delay, the feed motor
will begin cycling on and off. When the pellets are warming
up and on the verge of igniting, it is not uncommon for the
firebox to fill with smoke. Once ignition actually happens,
the smoke should evacuate quickly. During this stage as
well as any part during the burn process, the front door
should not be opened. This cycle continues until the appli-
ance senses ignition by a rise in the exhaust temperature
or the appliance times out. Following the ignition cycle the
appliance begins to feed additional pellets gradually for a
few minutes to build up the fire. This is important to have a
controlled start up to keep the appliance in balance.
G. Fire Characteristics
The overall height of the flame will vary throughout the burn
for a couple of reasons. First is that the flame will vary
based on type of fuel or even batch of fuel. Secondly, the
appliance adjusts the burn rate according to the how far
away the room temperature is from the set temperature.
This should not cause alarm. The third characteristic that
affects the fire relates to general maintenance and clean-
ing. Infrequent or poor general maintenance will result is
poorer performance. Indicators of the need for additional
maintenance activities include a lazy flame, black sooted
glass, pellets not igniting, or pellets falling to the side of the
firepot. See the maintenance section for additional infor-
mation.
CAUTION
Odors, vapors, and smoke released during initial
operation.
• Curing of high temperature paint.
• Open windows for air circulation.
Odors may be irritating to sensitive individuals.
7077-171I • December 08, 2016
9

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Ph50psPh50cabpsPh35ps seriePh50ps seriePh50cabps serie

Tabla de contenido