Genie CHAINLIFT 1022 Manual De Instrucciones página 22

1. By turning the Down Force Control _ clockwise,
the DOWN force can be increased. By turning
the Down Force Control _ counter-clockwise,
the DOWN force can be decreased. Set the
DOWN force level at the minimum force required
to close door without reversing.
2. Once the desired level is selected, this stores the
maximum force level for the DOWN direction in memory.
3. By turning the Up Force Control _ clockwise, the
UP force can be increased. By turning the Up Force
Control _; counter-clockwise, the UP force can be
decreased. Set the UP force level at the minimum
force required to open door without stopping.
4. Once the desired level is selected, this stores
the maximum force level for the UP direction
in memory.
1. Press and hold both of the "SET" buttons
FIG. 6-5
uo Force
OPEN contro
juslment
FORCE
CLOSE
Down Force
Contro
Adjuslmenl
ROTATE
CLOCKWISE
ROTATE
COUNTER-CLOCKWISE
Force Control Adjustment.
I
([] & Pq)together until the green indicator
light blinks (about 5 seconds).
2. All close and open travel limit settings are
erased. Then follow the steps above to
reprogram close and open travel limits.
NOTE: Th® os;,e_'ey
"no_ "' ........ ",,'
. ... w
d'O_;,_?
_:}
dOOy"
The force adjustments and limit switch settings
MUST BE COMPLETED before testing.
1. Testing.
• Open garage door using Wall Button.
- Place a 2" x 4" board (laid flat) under center
of garage door opening (Fig. 6-6).
• Close door using Wall Button.
• When door contacts board, it must stop and
reverse (within 2 seconds) to open position.
2. Adjustment.
• If the door does not properly reverse.
- Check to see if door has "close" limit
programmed. It should not have reached its
"close" limit before hitting board.
-If the door STOPS but does not reverse,
decrease "CLOSE FORCE" control _
setting slightly (turn it counter-clockwise).
• Test again. Repeat as necessary until door
reverses upon contacting board.
ii i i ii i i i i
FIG, 6-6 2 x 4 under center of door opening,
22
PN# 36420Supplement, 10/27/2008