Best CP45I Serie Instrucciones De Instalación página 15

23. OPERATION
Always turn your power pack on before you begin cooking to establish an air flow in the kitchen. Let the blower run for a few
minutes to clear the air after you turn off the range. This will help keep the whole kitchen cleaner and brighter.
1) B
LOWER LOW SPEED PUSH BUTTON
— L
INK
2) B
LOWER MEDIUM
— L
INK
3) B
LOWER MEDIUM
— L
INK
4) B
LOWER HIGH SPEED PUSH BUTTON
— L
INK
5) H
ALOGEN LIGHT PUSH BUTTON
— F
ILTER CLEANING RESET
COOKTOP LIGHTING (HALOGEN)
• The halogen lighting is controlled by the light push button (push button 5 on illustration above). Push once to turn the lights
ON (if memory was set it opens to the set light intensity) and push a second time to turn the lights ON to a brighter level from
1 to 4. If the lights are at the highest level, pressing another time will set them to the lowest intensity.
• Press and maintain for 1 second to turn OFF the lights and set the memorized intensity. When turned on, the halogen bulbs
will light cooktop at the previous setting.
• Use 120 V, 50 W, MR16 with GU10 base or PAR16 with GU10 base, shielded halogen lamps (included).
• The LED above this push button lights blue when the lights are ON.
BLOWER
The blower is controlled by the 4 blower push buttons (push buttons 1 to 4 on illustration above).
• P 1
USH BUTTON
– Press once to turn the blower ON to Low speed. Press a second time to turn the blower OFF.
– The LED above this push button lights blue when the blower is running and turns off when the blower is not running at low speed.
– When power level 1 is activated from OFF, 100% of power level is activated during 0.3 second acting as a "kick-start".
• P 2
USH BUTTON
– Press once to turn the blower ON to Medium-Low speed. Press a second time to turn the blower OFF.
– The LED above this push button lights blue when the blower is running and turns off when the blower is not running at
Medium-Low speed.
• P 3
USH BUTTON
– Press once to turn the blower ON to Medium-High speed. Press a second time to turn the blower OFF.
– The LED above this push button lights blue when the blower is running and turns off when the blower is not running at
Medium-High speed.
• P 4
USH BUTTON
– Press once to turn the blower ON to High speed. Press a second time to turn the blower OFF.
– The LED above this push button lights blue when the blower is running and turns off when the blower is not running at High
speed.
FUNCTIONS
: P
• D
ELAY OFF USH AND MAINTAIN EITHER OF PUSH BUTTONS
– A 10-minute delay off is activated by pressing and maintaining any blower speed push button for 2 seconds. The blower
operates at selected speed for 10 minutes.
– During this time, selected speed's LED is blinking while the blower is running.
– After 10 minutes has expired, the blower turns off and the LED stops blinking.
– If another speed level is selected during a DELAY OFF, the delay is transferred to that selected speed without resetting the timer.
• F
ILTERS CLEANING RESET
– When blower is turned OFF and the timer has counted 30 hours of operation, the light push button (5) LED blinks blue,
indicating the need to clean the filters.
– After filters are cleaned and reinstalled, press and maintain the light push button (5) for 2 seconds to reset the 30-hour
timer and stop the LED from blinking.
L ™ E L
OGIC RASE INK PUSH BUTTON
-
LOW SPEED PUSH BUTTON
L ™ L M
OGIC EXIT INK ODE PUSH BUTTON
-
HIGH SPEED PUSH BUTTON
L ™ M L M
OGIC ASTER INK ODE PUSH BUTTON
L ™ A L M
OGIC UTO INK ODE PUSH BUTTON
: P
USH AND MAINTAIN PUSH BUTTON
5
HC0045
1, 2, 3 4
OR FOR
5 2
FOR SECONDS
- 15 -
1 2 3 4
2
SECONDS