Best CP45I Serie Instrucciones De Instalación página 17

23. OPERATION
(CONT'D)
• E L P
RASE INK ROCESS
1. A "L
CTIVATE THE INK
Simultaneously press the Master Link Mode and Auto Link Mode push buttons (push buttons 3 and 4 on control
illustration) for 2 seconds; all 4 speed level LEDs flash.
2. E
RASE ALL LINKED
Press the Erase Link push button (push button 1 on control illustration) for 2 seconds to start the "Erase-link" process, all
4 speed level LEDs flash in rotation on the power pack interface until links are erased.
NOTE: For some LinkLogic™ devices, LEDs might not flash because the linking duration is too short.
3. E "L "
XIT INK MODE OF THE HOOD
Press and hold the Exit Link Mode push button (push button 2 on control illustration) for 2 seconds to exit "Link" mode.
Link mode remains activated for 4 minutes if no other operation is done.
• L I
INKING NFORMATION
L L
INK OGIC SYSTEM CONTROL BOARD JUMPERS
The LinkLogic system is designed to work with devices like the Broan SmartSense™ Fan system that requires CFM output
for this range hood. If you are using this power pack with a LinkLogic device that requires CFM information, please follow the
simple instruction/matrix below to configure the LinkLogic control board in the power pack to provide the correct CFM information.
To access the LinkLogic control board, remove baffle filters. Remove screws retaining the control panel to the hood. Rotate
carefully the control panel in order to see the LinkLogic board jumpers.
3
2
1
HE0089
L L
INK OGIC BOARD JUMPERS
If you are unsure if the LinkLogic accessory or device requires CFM data, please refer to the unit's instructions.
NOTE: If during normal operation, all 4 speed level LEDs quickly flash twice and in rotation, an error occurred while
communicating with a linked LinkLogic device. Reset this error flag by entering and then exit the Linking mode.
24. WARRANTY
Broan-NuTone LLC ("Broan-NuTone") warrants to the original consumer purchaser of its products that such products will be
free from defects in materials or workmanship for a period of one year from the date of original purchase. THERE ARE NO
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
During this one-year period, Broan-NuTone will, at its option, repair or replace, without charge, any product or part which is
found to be defective under normal use and service.
THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS, TUBES AND BULBS, FUSES, FILTERS,
DUCTS, ROOF CAPS, WALL CAPS AND OTHER ACCESSORIES FOR DUCTING. This warranty does not cover (a) normal
maintenance and service or (b) any products or parts which have been subject to misuse, negligence, accident, improper
maintenance or repair (other than by Broan-NuTone), faulty installation or installation contrary to recommended installation instructions.
The duration of any implied warranty is limited to the one-year period as specified for the express warranty. Some states or
provinces do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.
BROAN-NUTONE'S OBLIGATION TO REPAIR OR REPLACE, AT BROAN-NUTONE'S OPTION, SHALL BE THE
PURCHASER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. BROAN-NUTONE SHALL NOT BE LIABLE
FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH
PRODUCT USE OR PERFORMANCE. Some states or provinces do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state or province to
another. Any modification performed on this product without the authorization of Broan-NuTone will void this warranty. This
warranty supersedes all prior warranties.
To qualify for warranty service, you must (a) notify Broan-NuTone at the address or telephone number stated below, (b) give
the model number and part identification and (c) describe the nature of any defect in the product or part. At the time of
requesting warranty service, you must present evidence of the original purchase date.
"
MODE OF THE HOOD
L L
INK OGIC DEVICES
P 1 P 2 P
IN IN
0 0
0 0
0 1
0 1
0 = N
O JUMPER ON PIN
ONE-YEAR LIMITED WARRANTY
Best ® , 926 W. State Street, Hartford, WI 53027 (1-800-637-1453)
Best ® , 550, Lemire blvd, Drummondville, QC, Canada (1-866-737-7770)
www.bestrangehoods.com
3 M CFM
IN AXIMUM VALUE
0 0 CFM
1 300 CFM
0 500 CFM
1 600 CFM
1 = J
UMPER ON PIN
WARRANTY
- 17 -
P 1 P 2 P 3 M
IN IN IN AXIMUM
1 0 0
1 0 1
1 1 0
1 1 1
0 = N 1 = J
O JUMPER ON PIN
CFM
VALUE
900 CFM
1000 CFM
1200 CFM
1500 CFM
UMPER ON PIN