Light Bulbs - Best CP45I Serie Instrucciones De Instalación

20. REINSTALL EVOLUTION™ HYBRID
Remove protective plastic film covering Evolution™ hybrid baffle filters before installing them.
NOTE: Assemble the metal handles to the filters, using provided no. 8-32 x 1/4" screws, before installing them in the power pack.
It is recommended to install side filters first and finish with center one(s).
1. Insert one end of Evolution hybrid
baffle filter into the front channel of
the hood.
2. Raise the other end toward the
inside of power pack and insert in
the grease drip rail of the power pack.
Replacement filters are available from your dealer. See label inside power pack for size and part number.

21. LIGHT BULBS

This power pack must use shielded halogen lamps (120 V, 50 W PAR16 with GU10 base, 2 for the 36" wide power pack and 4
for the 42 to 66" wide hood), included.
NOTE: Before using lamps, remove shipping tape on them (if present).
In order to prevent the risk of personal injury, do not install a lamp
identified for use only in enclosed fixtures.
1. Install the lamps by placing the bulb leads into their grooves in the socket.
2. Gently push upwards and turn clockwise until secure.
In order to prevent the risk of personal injury, the halogen lamps must
be cooled down before removing them.
To remove lamps, gently push upwards and turn counterclockwise to disengage bulb leads from their grooves.
NOTE: If need be, use a rubber dishwashing glove to add grip when removing the bulb; or use suction cup tool available from
Best to ease removal of the bulbs. Contact Best Technical Support at 1-800-558-1711 to order suction cup tool, part
number 99526707.
BAFFLE FILTERS
CAUTION
1
HD0299
WARNING
!
WARNING
!
- 13 -
2
1
HO0090
2