Flap Replacement Instructions; Replacement Parts And Accessories - Petsafe Extreme Weather Pet Door Guia De Instalacion

Flap Replacement Instructions

Vinyl Flap Replacement and Adjustment
During extreme changes in weather, vinyl flaps can shrink during cold months and expand in warmer
months. Easily replace or adjust to ensure a snug fit during seasonal changes.
2
1
To Replace vinyl flap, Remove vinyl flap and flap
remove flap screws and flap clamp with attached insulated
support from top of pet door flap.
frame.
Note:
Note: Interior flap has a
has insulated flap attached,
flap support, exterior flap
exterior flap clamp does not.
does not.
To Adjust slightly loosen
flap screws on top of pet
door frame.
10 Customer Care Center 1-800-732-2677
3
Replace flap clamp with
attached insulated flap. Insert
new vinyl flap between flap
clamp and flap screw holes in
top of frame. The PetSafe
Interior flap clamp
should be readable on vinyl
flap. Replace flap support. Align
screw holes in flap support,
frame, vinyl flap and flap clamp.
Replace and start screws to
hold flap in place. Adjust flap
horizontally until centered in
pet door frame. Adjust flap
vertically until magnet bar on
frame jumps to meet magnet
on bottom of flap. Tighten
screws.
Adjust flap horizontally until
centered in pet door frame.
Adjust flap vertically until
magnet bar on frame jumps
to meet magnet on bottom of
flap. Tighten screws.
Insulated Flap Replacement
1
To replace the insulated
flap, remove flap screws
and flap support from top
of pet door frame.
logo
®

Replacement Parts and Accessories

Replacement parts can be purchased by visiting www.petsafe.net or by contacting our Customer
Care Center at 1-800-732-2677.
Part Description
Small Vinyl Replacement Flap
Medium Vinyl Replacement Flap
Large Vinyl Replacement Flap
Small Insulated Replacement Flap Kit
Medium Insulated Replacement Flap Kit
Large Insulated Replacement Flap Kit
Small Snap-on Closing Panel
Medium Snap-on Closing Panel
Large Snap-on Closing Panel
Installation Hardware Kit
Small Plastic Core Cover Kit
Medium Plastic Core Cover Kit
Large Plastic Core Cover Kit
2 3
Remove vinyl flap and Remove screws, insulated
flap clamp with attached flap and backing plate from
insulated flap. back of flap clamp. Insert
new insulated flap between
flap clamp back and backing
plate. Align screw holes.
Replace and tighten screws.
Follow step 3 under "Vinyl
Flap Replacement and
Adjustment" on page 10.
Part Number
PAC11-11037
PAC11-11038
PAC11-11039
MPA00-12817
MPA00-12818
MPA00-12819
MPA00-12826
MPA00-12827
MPA00-12828
MPA00-11824
MPA00-12664
MPA00-12665
MPA00-12666
www.petsafe.net 11