Maintenance And Cleaning - Centrometal CentroPelet ZV16 Instrucciones Técnicas

Maintenance and cleaning

All cleaning of all parts must be carried out with the termostove completely cold and unplugged
to avoid burns and thermal shock. The thermostove does not need much maintenance if used
with certified quality pellet. The need for maintenance varies depending on the conditions of use
(switching on and off repeatedly) and depending on the performance required.
Parts
Brazier
Cleaning the ash collection
compartment with suction device
Cleaning ash tray
Cleaning the door and glass
Exchanger (turbulators)
Flame beater
Cleaning the interior heat exchanger /
smoke fan compartment
Cleaning complete exchanger
Clean "T" to exhaust
Flue
Door gasket ash
Internal parts
Flue pipe
Circulation pump
Plate heat exchanger
Hydraulic components
Electromechanical components
◊ by the user
BY THE USER
Daily control
The thermostove requires a simple and thorough
cleaning in order to ensure a more efficient per-
formance and smooth operation.
While cleaning the inside of the thermostove, to
prevent the escape of ashes, you can start the
fan flue exhaust.
To enable this feature, you must press the but-
ton and then .
The display
(cleaning
To stop the fan, simply press and hold the but-
ton or wait for completion of a cleaning cycle
(255 seconds).
Clean the grate using the appropriate tool from
the ash and any incrustation which could ob-
struct the passage of air. In the case of depletion
of pellets in the tank may accumulate unburned
pellets in the burn pot.
Always empty the residuals from the grate be-
fore each start. Remember that only a brazier
Every 2-3
Everyday
◊
◊
shows "PUL
thermostove).
Every Every 15
days week days
◊
◊
◊
◊
• by the authorised qualified technical assistance
STUF "
Every 30 Every 60- Every 1
days 90 days
•
•
•
year
•
•
•
•
•
•
•
•
53