Centrometal CentroPelet ZV16 Instrucciones Técnicas página 48

Heating timer-thermostat
The heating timer-thermostat function is used to program the pellet boiler stove to automatically turn on and off within
a period of one week.
To access programming, hold down button
by pressing button several times and referring to the table below, the stove can be programmed according to your
needs. Press button to exit the programming phase at any time.
These are the heating timer-thermostat parameters:
Parameter Description
Heating timer-thermostat
UT01 enabling and disabling.
Day of the week setting
UT02 Current hour setting
UT03 Current minutes setting
Technical parameters
UT04
setting
Thermostove first start-up
UT05
time adjustment
Thermostove first shut-
UT06
down time adjustment
Week day selection, first
UT07
time activation
Thermostove second
UT08
start-up time adjustment
Thermostove second
UT09 shutdown time adjust-
ment
Week day selection,
UT10
second time activation
Thermostove third start-
UT11
up time adjustment
Thermostove third
UT12 shutdown time adjust-
ment
Week day selection, third
UT13
time activation
Thermostove fourth start-
UT14
up time adjustment
Thermostove fourth
UT15
shutdown time adjust-
ment
Week day selection,
UT16
fourth time activation
UT01: Heating timer-thermostat enabling and disa-
bling and current hour setting.
This parameter is used to set the current day of the week
or to deactivate the set programming.
Press buttons and
shown in the following table:
48
for around three seconds, "UT01" will be shown on the upper display:
Programmable
values
OFF; Day 1, ...,Day7
From 00 a 23
From 00 a 60
Reserved
From 00:00 to 23:50 with
10-minute steps
From 00:00 to 23:50 with
10-minute steps
Between on/off for days
from 1 to 7
From 00:00 to 23:50 with
10-minute steps
From 00:00 to 23:50 with
10-minute steps
Between on/off for days
from 1 to 7
From 00:00 to 23:50 with
10-minute step
From 00:00 to 23:50 with
10-minute step
Between on/off for days
from 1 to 7
From 00:00 to 23:50 with
10-minute steps
From 00:00 to 23:50 with
10-minute steps
Between on/off for days
from 1 to 7
to select the desired value as
Upper
display
Day 1
Day 2
Day 3
Day 4
Day 5
Day 6
Day 7
OFF Heating timer-thermostat disabled
Example:
if today is Thursday, select "d ay 4 "; but select "OFF" to
start the pellet boiler stove manually (without program-
ming) so that the heating timer-thermostat is disabled.
Press button to go to the following parameter.
UT02: Current hour setting
This parameter is used to set the current hour, press
buttons and to select the current hour.
Press button to go to the following parameter.
UT03: Current minutes setting
Press buttons and
Press buttons to go to the following parameter.
UT04: Technical parameters setting
Press button to go to the following parameter.
UT05: Thermostove first start-up time adjustment
This parameter indicates the time at which the pellet boiler
stove will be started: use buttons
desired time, with 10 minute steps.
Press button to go to the following parameter.
UT06: Thermostove shutdown time adjustment
This parameter indicates the time at which the pellet boiler
stove will be turned off: use buttons
the desired time, with 10 minute steps.
Press button to go to the following parameter.
Meaning
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
to adjust current minutes.
and to set the
and to set