Makita LS1013F Manual De Instrucciones página 10

ENGLISH
1 Stopper pin
2 Bolt
3 Blade guard
4 Knob
5 Kerf board
6 Saw blade
7 Blade teeth
8 Left bevel cut
9 Straight cut
10 Right bevel cut
11 Adjusting bolt
12 Turn base
13 Top surface of turn base
14 Periphery of blade
15 Guide fence
16 Adjusting screw
17 Stopper arm
18 Lock lever
19 Grip
20 Pointer
21 Miter scale
22 Lever
23 Arm
24 Bevel scale
25 Lock-off button
26 Switch trigger
SPECIFICATIONS
Model
Blade diameter ......................................................................................................................................... 250 – 260 mm
Hole diameter .....................................................European countries: 30 mm, other than European countries: 25.4 mm
Max. cutting capacities (H x W)
Miter angle
0°
45° (left and right)
52° (right)
–1
No load speed (min ) ............................................................................................................................................ 3,700
Dimensions (L x W x H) ..................................................................................................... 715 mm x 520 mm x 625 mm
Net weight ............................................................................................................................................................21.0 kg
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for accurate straight and miter cut-
ting in wood. With appropriate saw blades, aluminum can
also be sawed.
10
Explanation of general view
27 Handle
28 Light
29 Light switch
30 Socket wrench
31 Wrench holder
32 Center cover
33 Hex bolt
34 Blade case
35 Arrow
36 Shaft lock
37 Inner flange
38 Spindle
39 Ring
40 Outer flange
41 Hex bolt (left handed)
42 Dust nozzle
43 Dust bag
44 Fastener
45 Sub-fence
46 Sub-fence R
47 Screws
48 Vise arm
49 Vise rod
50 Clamp screw
51 Support
52 Turn base
45° (left)
50 mm x 305 mm
50 mm x 215 mm
–
53 Vise plate
54 Vise nut
55 Vise knob
56 Holder
57 Spacer block
58 Vise
59 Aluminum extrusion
60 Cut grooves with blade
61 Hex bolts
62 Triangular rule
63 Screw
64 Arm holder
65 Right 45° bevel angle
66 Left 45° bevel angle
67 Hex lock nut
68 Kerf block
69 Pull out
70 Push
71 Lamp box
72 Fluorescent tube
73 Limit mark
74 Brush holder cap
75 Screwdriver
Bevel angle
0°
91 mm x 305 mm
91 mm x 215 mm
91 mm x 185 mm
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.
adjusting bolt
adjusting bolt
LS1013F
45° (right)
31 mm x 305 mm
31 mm x 215 mm
–