Tabla de contenido
Idiomas disponibles
Idiomas disponibles
For more information, see chapter Removing and installing the hoist covers.
4. Pull out the control board.
5. When the control board is a few
centimeters out, unplug the brake cables
(1) and (2) from the control board.
6. Remove the end cover on the brake side.
For more information, see chapter
Removing and installing the hoist covers.
7. Pull the brake cables carefully out on the
brake side.
The brake cables are led through the
hoist frame from the brake side to the
motor side. Pay attention to how the
brake cables are led through the hoist
NOTA
frame. When you have installed the new
brake, you must lead the brake cables
again from the brake side back to the
motor side.
Este documento y la información contenida en éste son de propiedad exclusiva de Verlinde S.A.S., constituyen un
secreto comercial no público, confidencial del propietario, y no puede ser ni reproducido, divulgado a terceros,
modificado ni empleado de ninguna otra manera sin el permiso expreso escrito de Verlinde S.A.S. Copyright 2020 ©
Verlinde S.A.S. Todos los derechos reservados.
1. Main brake
7 MAINTENANCE
2. Secondary brake
3/2020
Tabla de contenido
