Tabla de contenido
Idiomas disponibles
Idiomas disponibles
8. Guide the chain through the hook block.
You can use the chain insertion tool to help
pulling the chain through the hook block.
9. Straighten the chain.
There may not be any twists in the chain
between the chain hoist and the hook in
either of the chain falls.
9.1 Rotate the hook until there are no
twists in the chain.
9.2 Straighten any twists on the free end
of the chain before attaching the chain
to the fixed end position.
10. Attach the chain to the fixed end position.
10.1Place the first chain link into the slot of
the suspension point.
10.2Insert the pin (2), which holds the
chain in place, into the hole on the
side.
10.3Push in the pin completely using a
hexagon key or a similar tool. The pin
secures the fixation of the chain only,
when you place it properly to the end
stop.
10.4Pull on the chain and check visually
that you have attached the pin and the
chain correctly.
10.5Apply Loctite thread locker to the
locking screw (1). Tighten the screw
carefully to secure the fixation of the
pin on its place.
Este documento y la información contenida en éste son de propiedad exclusiva de Verlinde S.A.S., constituyen un
secreto comercial no público, confidencial del propietario, y no puede ser ni reproducido, divulgado a terceros,
modificado ni empleado de ninguna otra manera sin el permiso expreso escrito de Verlinde S.A.S. Copyright 2020 ©
Verlinde S.A.S. Todos los derechos reservados.
1
2
7 MAINTENANCE
3/2020
Tabla de contenido
